Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.
Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.
All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.
Easy low-cost maintenance can be even performed on site by the machine operator.
A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.
All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:
Combined electric Bender & Bhears
Specially recommended for rebar production in small - medium housing or infrastructure projects with rebar sizes of up to Ø36mm / 13/8" (#11) for cutting and Ø52mm / 2" for bending, such as small resorts, condominiums, villas, low height apartment buildings, etc. A multi-purpose machine which also allows production of stirrups, spirals and hoops with its optional accessories.
The COMBI range is an ideal solution for small to medium rebar contractors and manufacturers, providing full working autonomy in any rebar work, and at a very low cost.
One machine, a single investment to do all rebar jobs with a medium production: bending, cutting, stirrups and spirals / hoops.
Electric Stirrups Benders
Rebar stirrups are the most common and repeating shapes used for rebar structures in construction, so the labour and time invested for its production is higher than any other rebar work.
Thanks to its handy and confortable design, STAR stirrup bender delivers a high performance and productivity, up to 700 - 1000 stirrups per hour depending on the rebar size, the stirrup shape and the operator skill. STAR stirrup bender represents a very tiny investment in comparison to its high output, which makes it a perfect partner for rebar fabricators / workshops, for their serial stirrups productions and for rebar jobs at sites, thanks to its adaptability.
It is also quite suitable for builder's merchants or hardware stores with rebar supplying services.
Bending capacity up to rebar 16mm (5/8" - #5) for STAR 16 and rebar 20mm (7/8" - #7) for STAR 20. Both models can bend multiple stirrups at the time with the same shape and bending quality.
Both models are available in single phase 230V and three phase 230V / 400V motor versions to ease the rebar works at any site.
The new STAR 20 is featured with a 360º turning bending plate so as to work clockwise and counterclockwise, for an increased operational flexibility. Also supplied with holders to store rebars and provide an easier rebar feeding.
Handy, Reliable and Powerful
Ideal for workshops and sites. Powerful and precise control of the bending angle at the pivots. It includes an emergency stop and reverse bend and is simple to use.
Can perform bottle necks double simultaneous bends. Monoblock cast iron gear box, overload protection system, heat – tempered pins, mandrels and bushes.
Combined machine that cuts. bends, makes spirals and stirrups for use on the job site.