Spiral Bending Machine SPIRAL-36

Reference: 20252020

In stock Delivery time: 4-5 working days

Send to a friend
Send to a friend

Spiral Bending Machine SPIRAL-36
SIMA’s SPIRAL 36 spiral bending machine is specially designed to produce spiral or hoop rebar, whether at the job site or in the workshop, for structures used in many circular reinforced concrete formworks, such as foundations, scorings, water dams and reservoirs, domes, arches, tunnels, and round pillars and columns.
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Info about Spiral Bending Machine SPIRAL-36

SIMA’s SPIRAL 36 spiral bending machine is specially designed to produce spiral or hoop rebar, whether at the job site or in the workshop, for structures used in many circular reinforced concrete formworks, such as foundations, scorings, water dams and reservoirs, domes, arches, tunnels, and round pillars and columns.

Our rebar spiral machines can shape a minimum diameter of 6mm (1/4" - #1) up to a maximum of 26mm (1" - #8) or 36mm (1- 3/8" / #11), depending on the machine model and the rebar strength (grade).

Hoop/Spiral Bending Machine

No need to pre-bend the leading end of the rebar.
Safety pedal operated.
Automatic or manual operation.
Double speed operation, 7 or 14 meters (23ft. and 46ft.) per minute.
Left- and right-handed spirals.
2 tempered cog-wheel formers.
Adjustable central cog-wheel for spiral or hoop curve radius.
2 ramps with rollers for pitch adjustment.
Complete control panel, including emergency stop button, on/off switch, warning lights and operation switch selector.

Only robust equipment can stand up to the task of shaping rebar for many years, which is why SIMA’s rebar spiral machines are made from highly resistant stainless materials. Free shipping and returns on all spiral bending machines to the UK.

SIMA SPIRAL 36 rebar spiral machine. Max. bending Ø: 36mm. Engine: Electric three phase 415V. Power: 2.5KW.

Videos-Spiral Bending Machine SPIRAL-36

Data sheet

Motor Phase (1Phase/3Phase)	Threephased
Energy	Electric
Engine / Motor Power (Kw)	2,5
Motor Voltage (V)	230/400
Frecuency Motor (Hz)	50
Installed plug	400V. 16A. 3P+N+T 6H
Max. bendind diameter (mm)	32
Turns per minute	697-1387
Dimensions (LxWxH) (mm)	1200X720X900
Package Sizes (LxWxH) (mm)	1220X775X1130
Weight (Kg)	481

Benefits - Spiral Bending Machine SPIRAL-36

Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for "Z" shaped figures (bottle neck shapes).
Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

COMBI machines have the same production and bending capacities as our DEL range benders.
They are also featured with the same electrical and mechanical safety devices as DEL machines and its electric components are of worldwide known top quality suppliers as Schneider-Electric.
Cast-iron shear body and gearbox case to ensure heavy duty performance and endurance with the lowest maintenance. Oil bath,
trapezoidal and helicoidal gears.
Safety shield with limit switch on shear body and bending table.
Easy low-cost maintenance can be even performed on site by the machine operator.
Single-phase 220V version with inverter technology available for model COMBI 25/32. The inverter stabilizes the electric supply so it makes the motor life longer. Two speeds motor available upon request on models COMBI 25/32 and COMBI 30/36.

STAR 16 and STAR-20 are not only able to produce standard stirrups but virtually any rebar shape tipically used in rebar structuresconstruction, such as: hooks, separators, anchorages, rebar feet, elbows, reinforcements, etc.
Able to bend several rebar at the time depending on rebar size and strength (Grade).
Easy and simple operation: it does not require highly qualified operators.
All the necessary pins, rollers and mandrels, as well as the adjustable stop ruler are supplied as standard equipment.
Pins and rollers can be customized upon request to suit to our customers requirements.
Control panel designed and built in accordance with CE regulations

Questions about this product

Reviews

No customer comments for the moment.