• New
Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36
  • Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

See technical data
20252002
Select model
Click and add accesories
Quantity
£5,315.00 Price without VAT
£6,378.00 Price with VAT

In stock Free shipping in 4-5 working days

 

2 years extendable warranty

 

Request technical assistance or help with your purchase

Related products Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Machine Bestsellers SIMA

Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36
Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36
£5,315.00 Price without VAT
£6,378.00 Price with VAT
Free shipping in 4-5 working days
See product
Bridge/Slab Saw 14"110V Elect. VENUS 2000mm
Bridge/Slab Saw 14"110V Elect. VENUS 2000mm
£2,747.00 Price without VAT
£3,296.40 Price with VAT
Out of stock
See product
Bench/Brick Saw 28"230V Elect. BALI 700
Bench/Brick Saw 28"230V Elect. BALI 700
£2,716.00 Price without VAT
£3,259.20 Price with VAT
Free shipping in 4-5 working days
See product
Manual Bolt Cutter-Shear 16mm TX-16
Manual Bolt Cutter-Shear 16mm TX-16
£148.00 Price without VAT
£177.60 Price with VAT
Free shipping in 4-5 working days
See product
Rebar Cutter 20mm Elect. 230V 1,20Kw CX20
Rebar Cutter 20mm Elect. 230V 1,20Kw CX20
£1,316.00 Price without VAT
£1,579.20 Price with VAT
Free shipping in 4-5 working days
See product
Manual Steel Cutter-Shear 32mm C-6/32
Manual Steel Cutter-Shear 32mm C-6/32
£574.00 Price without VAT
£688.80 Price with VAT
Free shipping in 4-5 working days
See product
Manual Stirrup Bender 12mm DM-12
Manual Stirrup Bender 12mm DM-12
£211.00 Price without VAT
£253.20 Price with VAT
Free shipping in 4-5 working days
See product
Diamond Blade Wet Cut-Granite 28"/700mm
Diamond Blade Wet Cut-Granite 28"/700mm
£551.00 Price without VAT
£661.20 Price with VAT
Free shipping in 4-5 working days
See product

Description Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Assembled with a new compact motor-reductor fitted with heat-tempered and rectified gears, no belt transmission and therefore low maintenance: (oil to be changed every 6000 hours of operation)

Rebar Bender DEL 36 Max. Ø Bending: 36mm. Engine: Electric Three Phase 400V. Power: 2,2Kw

See technical data

Data sheet - Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Motor Phase (1Phase/3Phase) Threephased
Energy Electric
Engine / Motor Power (Kw) 3
Motor Voltage (V) 400
Frecuency Motor (Hz) 50
Installed plug 400V 16A 3P+T Rot
Max. bendind diameter (mm) 36
Turns per minute 11
Dimensions (LxWxH) (mm) 910x808x1141
Package Sizes (LxWxH) (mm) 950x850x1050
Weight (Kg) 302
youtube_video Bs1Dgoxypvk

Videos - Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Questions about - Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

Benefits - Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

  • Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
  • Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
  • Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for "Z" shaped figures (bottle neck shapes). 
  • Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

  • COMBI machines have the same production and bending capacities as our DEL range benders.
  • They are also featured with the same electrical and mechanical safety devices as DEL machines and its electric components are of worldwide known top quality suppliers as Schneider-Electric.
  • Cast-iron shear body and gearbox case to ensure heavy duty performance and endurance with the lowest maintenance. Oil bath,
    trapezoidal and helicoidal gears.
  • Safety shield with limit switch on shear body and bending table.
  • Easy low-cost maintenance can be even performed on site by the machine operator.
  • Single-phase 220V version with inverter technology available for model COMBI 25/32. The inverter stabilizes the electric supply so it makes the motor life longer. Two speeds motor available upon request on models COMBI 25/32 and COMBI 30/36.

  • STAR 16 and STAR-20 are not only able to produce standard stirrups but virtually any rebar shape tipically used in rebar structuresconstruction, such as: hooks, separators, anchorages, rebar feet, elbows, reinforcements, etc.
  • Able to bend several rebar at the time depending on rebar size and strength (Grade).
  • Easy and simple operation: it does not require highly qualified operators.
  • All the necessary pins, rollers and mandrels, as well as the adjustable stop ruler are supplied as standard equipment.
  • Pins and rollers can be customized upon request to suit to our customers requirements.
  • Control panel designed and built in accordance with CE regulations

Valoraciones - Rebar Bender 36mm Elect. 400V 2,2Kw DEL-36

chat Comments (0)